THE PARTS SHELF

Start with the parts.

Real supplier references, exact inclusions and a date on every price.
Add a shortlist. Check the guide. Buy from the supplier when you’re ready.

These are individual research references, not a compatible complete kit. Some links are Seeed affiliate links. Eligible purchases may earn Modurobot a commission; other supplier links are standard links.

12 parts · USD · checked November 2, 2026

Robot components

SO-101 Pro motor kit supplier photograph
Seeed Studio

SO-101 Pro motor kit

$249.90USD · observed Nov 2

Motor kit, adapter boards and cables for the leader/follower build. Printed structures and cameras excluded.

Fit & limitations

A documented LeRobot starting point. Requires assembly, calibration and a compatible computer; no Modurobot physical test.

SKU 114993667 · Physical integration untested by Modurobot

SO-101 structural prints supplier photograph
Seeed Studio

SO-101 structural prints

$29.90USD · observed Nov 2

Printed structural parts only. Motors, electronics and cameras are separate.

Fit & limitations

Choose the matching SO-101 revision. This accessory price is not the price of a working robot.

SKU 114993668 · Physical integration untested by Modurobot

Parallel gripper + servo supplier photograph
goBILDA / ServoCity

Parallel gripper + servo

$34.99USD · observed Nov 2

One parallel gripper kit with its servo. Control electronics and mounting are extra.

Fit & limitations

Separate module with a 16 mm mounting pattern. Not a confirmed replacement for the SO-101 gripper.

SKU 3219-0001-0002 · Physical integration untested by Modurobot

Supplier
LeKiwi mobile base supplier photograph
Seeed Studio

LeKiwi mobile base

$179.00USD · observed Nov 2

12 V mobile base kit. Arm, Raspberry Pi and cameras are extra; confirm the selected battery/warehouse option.

Fit & limitations

A separate, vendor-documented platform. It is not the four-wheel or wheeled-crab robot depicted in the villa.

SKU 114090065 · Physical integration untested by Modurobot

M8 swivel caster supplier photograph
goBILDA

M8 swivel caster

$7.99USD · observed Nov 2

One passive caster. Four cost $31.96; deck and fixings are extra.

Fit & limitations

Manual push only. The fetched listing does not establish a load rating for the proposed robot.

SKU 3621-0001-0001 · Physical integration untested by Modurobot

Supplier
Bus-servo USB driver supplier photograph
Seeed Studio

Bus-servo USB driver

$5.00USD · observed Nov 2

One USB adapter for compatible ST/SC bus servos.

Fit & limitations

May already be included in the arm kit. Confirm kit contents, servo voltage and protocol before adding another.

SKU 100011625 · Physical integration untested by Modurobot

X10 USB camera supplier photograph
Seeed Studio

X10 USB camera

$12.00USD · observed Nov 2

One wired 1080p USB camera.

Fit & limitations

Supplier lists SO-101 / LeKiwi data collection use. Camera mounts and a compatible computer are still required.

SKU 114090066 · Physical integration untested by Modurobot

The phone you already own illustration
Reuse your device

The phone you already own

$0.00already owned

An owned phone or tablet. Illustration, not a product photograph.

Fit & limitations

A physical clamp and camera-to-controller integration need development. The villa phone is simulated.

SKU Already owned · Physical integration untested by Modurobot

Reuse your device
VL53L1X distance sensor supplier photograph
Adafruit

VL53L1X distance sensor

$14.95USD · observed Nov 2

One STEMMA QT I²C breakout. Cable and host controller are extra.

Fit & limitations

3-5 V board. Range depends on target and lighting; a sensor does not establish collision-safe movement.

SKU 3967 · Physical integration untested by Modurobot

Supplier
Capacitive soil sensor supplier photograph
Adafruit

Capacitive soil sensor

$7.50USD · observed Nov 2

One I²C soil sensor. JST-PH cable is extra.

Fit & limitations

Relative readings require calibration for your soil; not an absolute moisture percentage.

SKU 4026 · Physical integration untested by Modurobot

Supplier
12 V peristaltic pump supplier photograph
Adafruit

12 V peristaltic pump

$24.95USD · observed Nov 2

Pump and tubing. Driver, power supply, reservoir and mounting are extra.

Fit & limitations

A watering component, not a tested autonomous watering system.

SKU 1150 · Physical integration untested by Modurobot

Supplier
Mounts, power & fixings supplier photograph
Specify for your build

Mounts, power & fixings

Not pricedspecification needed

Build-specific brackets, bench clamps, cables and power requirements.

Fit & limitations

Price unknown. Specify these from the manufacturer BOM before treating a shortlist as a complete budget.

SKU Unspecified · Physical integration untested by Modurobot

Build-specific

Stock, selected options and prices can change. The supplier checkout is authoritative. Unpriced essentials remain separate from your subtotal.

Optional and off. No names, browser IDs or worksheet values. Privacy details.